Ingeniør og teknik › Teknik og miljø › Ingeniør og teknik, øvrigt × Danmark ×

If you have solid experience from working with cleaning in the pharma industry, you have just the right foundation to be our new colleague – and our expert representative in Novo Nordisk’s cross organisational cleaning competency group.

About the department
You will join Insulin Manufacturing 2 (IM2). We produce API for a number of Insulin finish products. Your closest colleagues will be a group of 6 Chemists and technicians in Utility Support but as expert you will be working across the total production facility.

The job
Your focus will be cleaning validation. As such, you formulate and challenge the cleaning strategies and set the direction for the area. This includes ensuring our cleaning processes, methods and equipment apply with Novo Nordisk’s and the authorities directions and if major changes are needed you handle the change requests.

The Section for Proton Conductors at DTU Energy Conversion is seeking qualified and highly motivated candidates for a vacant PhD positions within fundamental aspects of high temperature PEM fuel cells (HTPEMFC). The section is involved in the development of both fuel cells and electrolyzers in the temperature range from 100 – 500°C.

For fuel cell based on phosphoric acid doped polybenzimidazole, the group is among the leading research groups in the world. The research and development activities take place in close collaboration with industry e.g. Danish Power Systems and SP Group. Further, there is a comprehensive collaboration with other companies and universities all over the globe.

You will be joining a large group consisting of more than 25 scientists and technicians plus a number of students at different levels. You will be working in a truly international setting where approx. half of the staff is from outside Denmark. The laboratories are well equipped.

Job description
The PhD project is part of the 4 M research centre program (Danish Council for Strategic Research).

The Section for Proton Conductors at DTU Energy Conversion (DTU Lyngby Campus) is seeking highly motivated Postdocs for development of High Temperature PEM fuel cells (HTPEMFC). The section is involved in the development of both fuel cells and electrolyzers in the temperature range from 100 – 500°C.

For fuel cells based on phosphoric acid doped polybenzimidazole the group is among the leading research groups in the world. The section is one of ten sections at Department of Energy Conversion and Storage with ca. 250 employees all devoted to different aspects of energy conversion. The research and development activities take place in close collaboration with industry e.g. Danish Power Systems and SP Group. Further, there is a comprehensive collaboration with other companies and universities all over the globe.

Job description
You will play an important role in new projects that are concerned with the development of HTPEMFC.

Sektion for Protonledere ved DTU Energikonvertering søger en laborant/tekniker til forskningsstøtte og arbejde med drift og vedligehold af apparatur. Sektionen beskæftiger sig med forskning og udvikling af både brændsels- og elektrolyseceller i temperatur området fra 100 – 500°C.

For polymerbrændselsceller med drifttemperatur over 100 grader er sektionen blandt de førende i verden. Vi arbejder med alle aspekter af brændselscellen op til enkeltcelleniveau, lige fra fremstilling af polymerer og katalysatorer til samling og test af de færdige celler. Forskningen foregår i et tæt samarbejde med både danske og udenlandske samarbejdspartnere.

Du vil komme til at indgå i en sektion med 25 forskere og teknikere, samt en række studerende på forskelligt niveau. Arbejdssproget i sektionen er primært engelsk, da ca. halvdelen af medarbejderne kommer fra udlandet. Sektionen har en bred vifte af analyseudstyr og flere laboratorier.

As a part of the ongoing research effort within inorganic chemistry and emission control at the Technical University of Denmark (DTU) a Researcher position is available within the Center for Combustion and Harmful Emission Control (CHEC) at the Department of Chemical and Biochemical Engineering.

The position is available from September 1^st, 2013. It involves a close collaboration with relevant industry. The candidate must have good communication skills and be able to work independently. The candidate is expected be involved in the education and research activities in the Sino-Danish Center for Education and Research (SDC).

Qualifications
The applicant has a M.Sc. and Ph.D. degree in Chemical Engineering, preferably with documented capabilities and experiences in the following areas:

• Laboratory-, pilot- and full-scale experiments on combustion/co-combustion of solid fuels (coal, biomass, waste), related to inorganic chemistry (release, deposition, aerosol formation, additive utilization) and/or control of pollutant emissions

DTU søger en medarbejder til Afdelingen for Innovation og Sektorudvikling. Du skal medvirke til at bringe DTU’s viden i spil i virksomheder, brancheorganisationer og i den offentlige sektor. Du vil få særlig fokus på analyseopgaver og metodeudvikling.

Afdelingen for Innovation og Sektorudvikling beskæftiger ca. 60 medarbejdere (stabsdelen). Du bliver en del af kontoret for Erhverv og Regional Udvikling, som pt. består af 8 personer.

Jobbet
Vores nye medarbejder skal udføre analyser af forsknings- og innovationsbehovene i relevante erhvervssektorer og brancher. Som en del af dette arbejde skal du bidrage til at udvikle nye koncepter og metoder for DTU’s samspil med erhvervslivet. Arbejdet sker sammen med kollegerne i afdelingen – og med forskere på DTU’s institutter. Du vil ligeledes indgå i udvikling og opstart af nye projekter, hvor omdrejningspunkterne er innovation og erhvervsudvikling.

DTU Nanotech wishes to employ a postdoctoral researcher in the framework of the VKR project ”Single-molecule photothermal spectroscopy with nanostrings”. The postdoc will focus on nanomechanical photothermal IR spectroscopy for monitoring of bacterial infections in Cystic Fibrosis patients.

For patients with the genetic disease Cystic Fibrosis, one of the major concerns is lung infection by the bacteria Pseudomonas aeruginosa, which has recently been reported to be detectable in the patient’s breath using hydrogen cyanide as biomarker. In this project, the hydrogen cyanide is sampled and detected with an IR spectrometer based on a novel nanomechanical sensor.

Qualifications
The ideal candidate holds a PhD in physics, analytical chemistry or engineering. A strong background in micro & nanoelectromechanical sensor technology, analytical instrumentation, and technology development & implementation is an advantage. Furthermore a strong interest in chemical analysis, clinical testing, and microfabrication is required.

The Novo Nordisk Foundation Center for Biosustainability (CFB) at DTU, the Technical University of Denmark invites applications for a position in the compound identification and non-targeted analysis efforts at the Center. The CFB focuses on developing the next generation of cell factories deploying advanced metabolic engineering techniques, and the development of bioprocesses for a sustainable production of chemicals and high value compounds including therapeutic proteins.

The overall mission of CFB is to contribute to research, development and innovation within the following scientific areas: Discovery of novel biosynthesis routes and exploration of compounds suitable for a sustainable bioproduction and shortening the time of production strain development through intelligent design of cell factories. The center comprises 10 research units (9 scientific sections conducting basic research and a Group conducting translational research).

Job Description
The Analytics Group is a new group at the CFB; the purpose is to provide a reliable, accurate and high through put analytical services for the center as a whole.

Har du erfaring med udvikling og udførelse af mekaniske produktest, validering af testmetoder samt koordinering af test? Så har vi jobbet...

ConvaTec B2B er en global virksomhed, der er specialiseret i udvikling, produktion og markedsføring af sterile medicinske engangsartikler til behandling af diabetes. Vores særkende er at være en virksomhed, hvor faglig dygtighed, nytænkning og høj kvalitet hjælper diabetikere over hele verden.

Hovedarbejdsopgaver:

• Deltage i udviklingsprojekter med ansvar for udvikling af produkttest, udvikling af testmetoder og -udstyr, validering af testmetoder, vurdering af måleteknisk udstyr og -metoder samt udarbejdelse af testdokumentation
• Sikre en ensartet høj standard ved dokumentation af test i udviklingsprojekter m.v.
• Medvirke til fortsat udvikling af vores testområde herunder fastlæggelse af test- og acceptkriterier

Vores kontoradresse er i Osted ved Roskilde, ca. 40 minutters kørsel fra København.

Vil du gerne bygge videre på din solide tekniske indsigt i et dynamisk udviklingsmiljø? Og befinder du dig godt i rollen som specialisten med den dybdegående viden på materialesiden og med mange samarbejdsrelationer ud i organisationen? Så er jobbet som materialespecialist hos VELUX Accessories i Skjern noget for dig.

I VELUX Accessories, hvor vi er 500 medarbejdere, fokuserer vi på udvikling, produktion og sourcing af solafskærmningsprodukter, rulleskodder, elektronik og indbygningsprodukter. Inden for VELUX Accessories har vi aktiviteter i såvel Danmark som Frankrig, Tjekkiet og Kina.

Du bliver en del af den mekaniske udviklingsafdeling og kollega med ca. 30 dygtige og veluddannede medarbejdere, hvor du vil indgå i et kompetent materialeteam på i alt 3 kolleger.

Dine opgaver og udfordringer
Du får dine egne ansvarsområder, hvor du bliver ansvarlig for, at der anvendes de mest optimale materialer i VELUX konstruktioner. Ligeledes får du ansvar for at formidle din viden videre til dine kolleger i R&D.